Arctic Cat 250 300 Stator Coil 2006-2009
OEM Replacement Part Number : 3303-833 , 3304-682
Dimensions :
Interior diameter : 35mm / 1.37″
Exterior diameter : 93mm / 3.68″
Pole’s Thickness : 27.3mm / 1.07″
Pole’s Width : 11.4mm / 0.45″
Number of wires: 5
Number of pins: 5
Number of plugs: 2
Number of fixation holes: 3(+3)
Number of poles: 18
Compatible with the following vehicles:
ATV 250/300 250 UTILITY 2X4 AUTO 2006-2009
250 Utility 2X4 2006-2009
DVX 250 2006-2008
NOTE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
